Skill Development

Professional Electrical Training

Certified programs for electrical teams, linemen, and site crews — fall protection & lifeline systems, PPE usage, HT/LT operations, and rescue planning. Delivered by industry-experienced engineers from Electron Infratech Pvt. Ltd.

Fall ProtectionLifeline SystemsPPE & SafetyHT / LT Operations

Fall Protection Training

Before using any fall protection product, every worker must complete supervised training covering hazard identification, correct equipment selection, anchoring, inspection, and proper wear.

All workers must be trained under careful and competent supervision before using any fall protection products.

Manufacturer’s user instructions, warnings, cautions, and equipment limitations must be reviewed, understood, and followed.

Identify potential fall hazards before starting work.

Determine which products to use in specific work environments.

Demonstrate proper anchoring procedures.

Inspect and maintain fall protection equipment regularly.

Demonstrate procedures and the proper wearing of fall protection equipment.

Planning for a Rescue

A written rescue plan is mandatory. Reduce hanging time and be ready for unconscious casualties.

The rescue plan must be written in the hazard analysis.

The goal is to rescue the employee as soon as possible and reduce hanging time.

Plan to rescue a worker that is unconscious.

Ensure all rescue equipment is available in the near vicinity.

Fall Arrest Systems

Horizontal & Vertical Lifelines

USP-11000 and USP-12000 horizontal systems provide permanent anchorage along a track with SS 316 components. USP-1000 vertical systems secure ladder and tower access. Training covers installation awareness, inspection plates, and correct use of skaters, tensioners, and retractable blocks.

USP-11000

Horizontal Lifeline — Over The Roof

Permanent anchorage for users who move constantly along a horizontal track. Built with SS 316 wire rope, anchor extremity plates, shock absorber, tensioner, carriage/skater, intermediates, and cable extremities.

8 mm wire rope (7×19) along the full horizontal track

Shock absorber reduces impact on user and extremities

Tensioner with swageless terminations at both ends

Intermediate brackets every 5–15 m, orientable in all directions

Installable on walls, floors, ceilings, and rooftops

USP-12000

Horizontal Lifeline — Over The Head

Overhead horizontal lifeline for continuous movement with a carriage/skater and lanyard or retractable block — ensuring uninterrupted 100% anchorage through intermediate brackets.

Anchor extremity plate, shock absorber & tensioner

Horizontal skater moves smoothly along the full line

Wire rope and corner pieces for multi-direction runs

Inspection plate for annual revalidation tracking

Ideal for plant roofs, walkways, and elevated work zones

USP-1000

Vertical Lifeline

Permanent vertical lifeline for safe ladder and structure access — designed for towers, monopoles, wind turbines, and lighting columns.

Ladder access installations

Lattice construction towers and monopoles

Wind turbine access

Lighting column access

Component set includes rail, brackets, and traveler units

Safety Gear

Recommended PPE

Essential personal protective equipment covered in our safety and fall-protection training modules.

Hard Hat

Industrial safety helmet for head protection

Safety Goggles

Wrap-around eye protection for field work

Safety Glasses

Impact-resistant lenses for daily site use

Respirator

Dual-cartridge protection in dusty / fume zones

Programs

Training Calendar

Structured programs for electrical teams, solar installers, linemen, and substation operators — including fall protection and lifeline system modules from your safety curriculum.

3 Days

15–20 participants

Field Level

Electrical Safety for Linemen

Hands-on safe work practices for distribution linemen — live line working, PPE usage, earthing procedures, and emergency response.

Safe work permits & isolation

PPE selection and usage

HT/LT live line procedures

Accident prevention techniques

First aid for electrical accidents

2 Days

12–18 participants

Safety

Fall Protection & Lifeline Systems

Training on horizontal and vertical lifeline systems, harness fitting, anchoring, inspection, and rescue planning for work at height.

Hazard identification at height

USP-11000 / USP-12000 / USP-1000 overview

Harness fitting & equipment inspection

Anchoring & intermediate bracket practice

Written rescue plan drills

4 Days

10–12 participants

Technical

Substation Operations & Maintenance

Operational training for 11 kV and 33 kV substation personnel — switching, protection, maintenance, and safety.

Switching operations & permits

Protection relay basics

Transformer & VCB maintenance

Earth mat testing

Incident reporting

2 Days

10–15 participants

Hands-on

Cable Termination & Jointing

Practical LT and HT cable termination and jointing using heat-shrink and cold-shrink kits — with live practice sessions.

Cable preparation techniques

LT cable termination

HT heat shrink jointing

Crimping & compression lugs

Testing after jointing

3 Days

10–12 participants

Technical

Electrical Testing & Commissioning

Test equipment usage and commissioning for transformers, switchgear, cables, motors, and protection relays.

Insulation resistance testing

High voltage testing (HV Kit)

Earth resistance testing

Power quality analysis

Relay testing & settings

1 Day

15–20 participants

Safety

Working at Height — Electrical

Safety training for electrical workers on poles, towers, and elevated structures — harness usage, fall prevention, and rescue.

Risk assessment at height

Harness fitting & inspection

Fall arrest systems

Rescue planning

Practical drill sessions

— Skill Development

In-House Corporate Training

Customized programs at your facility — fall protection, PPE, HT/LT operations, and lifeline systems — for electrical and industrial teams across India.

Explore Programs Book a Session